|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
APTC60DAM18CTG Boost chopper SiC FWD diode Super Junction MOSFET Power Module VBUS VBUS SENSE NTC2 VDSS = 600V RDSon = 18m max @ Tj = 25C ID = 143A @ Tc = 25C Application * AC and DC motor control * Switched Mode Power Supplies * Power Factor Correction Features * CR1 OUT Q2 * Ultra low RDSon Low Miller capacitance Ultra low gate charge Avalanche energy rated G2 S2 0/VBU S NTC1 FWD SiC Schottky Diode - Zero reverse recovery - Zero forward recovery - Temperature Independent switching behavior - Positive temperature coefficient on VF Kelvin source for easy drive Very low stray inductance - Symmetrical design - Lead frames for power connections Internal thermistor for temperature monitoring High level of integration * * * * G2 S2 OUT VBUS 0/VBUS OUT VBUS SENSE S2 G2 NTC2 NTC1 Benefits * Outstanding performance at high frequency operation * Direct mounting to heatsink (isolated package) * Low junction to case thermal resistance * Solderable terminals both for power and signal for easy PCB mounting * Low profile * RoHS compliant Max ratings 600 143 107 572 30 18 833 20 1 1800 Unit V APTC60DAM18CTG - Rev 2 October, 2005 Absolute maximum ratings Symbol VDSS ID IDM VGS RDSon PD IAR EAR EAS Parameter Drain - Source Breakdown Voltage Continuous Drain Current Pulsed Drain current Gate - Source Voltage Drain - Source ON Resistance Maximum Power Dissipation Avalanche current (repetitive and non repetitive) Repetitive Avalanche Energy Single Pulse Avalanche Energy Tc = 25C Tc = 80C A V m W A mJ Tc = 25C These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website - http://www.advancedpower.com 1-7 APTC60DAM18CTG All ratings @ Tj = 25C unless otherwise specified Electrical Characteristics Symbol IDSS RDS(on) VGS(th) IGSS Characteristic Zero Gate Voltage Drain Current Drain - Source on Resistance Gate Threshold Voltage Gate - Source Leakage Current Test Conditions VGS = 0V,VDS = 600V VGS = 0V,VDS = 600V Min Tj = 25C Tj = 125C 2.1 Typ VGS = 10V, ID = 71.5A VGS = VDS, ID = 4mA VGS = 20 V, VDS = 0V 3 Max 100 1000 18 3.9 200 Unit A m V nA Dynamic Characteristics Symbol Ciss Coss Crss Qg Qgs Qgd Td(on) Tr Td(off) Tf Eon Eoff Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total gate Charge Gate - Source Charge Gate - Drain Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Switching Energy Turn-off Switching Energy Test Conditions VGS = 0V VDS = 25V f = 1MHz VGS = 10V VBus = 300V ID = 143A Inductive switching @ 125C VGS = 15V VBus = 400V ID = 143A R G = 1.2 Inductive switching @ 25C VGS = 15V, VBus = 400V ID = 143A, R G = 1.2 Inductive switching @ 125C VGS = 15V, VBus = 400V ID = 143A, R G = 1.2 Min Typ 28 10.2 0.85 1036 116 444 21 30 283 84 1608 3920 2630 4824 Max Unit nF nC ns J J Chopper diode ratings and characteristics Symbol Characteristic VRRM Maximum Peak Repetitive Reverse Voltage IRM IF VF QC C Maximum Reverse Leakage Current DC Forward Current Diode Forward Voltage Total Capacitive Charge Total Capacitance Test Conditions VR=600V Tj = 25C Tj = 175C Tc = 125C Tj = 25C Tj = 175C Min 600 Typ Max 2 10 Unit V mA A APTC60DAM18CTG - Rev 2 October, 2005 IF = 100A 100 1.6 2.0 140 650 500 1.8 2.4 V nC pF IF = 100A, VR = 300V di/dt =2400A/s f = 1MHz, VR = 200V f = 1MHz, VR = 400V APT website - http://www.advancedpower.com 2-7 APTC60DAM18CTG Thermal and package characteristics Symbol Characteristic RthJC VISOL TJ TSTG TC Torque Wt Junction to Case Thermal Resistance Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight Transistor Diode 2500 -40 -40 -40 1.5 Min Typ Max 0.15 0.28 150 125 100 4.7 160 Unit C/W V C N.m g RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz To heatsink M5 Temperature sensor NTC (see application note APT0406 on www.advancedpower.com for more information). Symbol Characteristic R25 Resistance @ 25C B 25/85 T25 = 298.15 K Min Typ 50 3952 Max Unit k K RT = R 25 1 1 RT : Thermistor value at T exp B 25 / 85 T - T 25 T: Thermistor temperature SP4 Package outline (dimensions in mm) ALL DIMENSIONS MARKED " * " ARE TOLERENCED AS : APT website - http://www.advancedpower.com 3-7 APTC60DAM18CTG - Rev 2 October, 2005 APTC60DAM18CTG Typical CoolMOS Performance Curve 0.16 Thermal Impedance (C/W) 0.14 0.12 0.1 0.08 0.06 0.04 0.02 0.3 0.1 0.05 0.0001 Single Pulse 0.001 0.01 0.1 1 10 Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 0.9 0.7 0.5 0 0.00001 rectangular Pulse Duration (Seconds) Low Voltage Output Characteristics 800 700 ID, Drain Current (A) 600 500 400 300 200 100 0 0 5V 4.5V 4V 6.5V 6V 5.5V Transfert Characteristics 540 I D, Drain Current (A) VDS > ID(on)xRDS (on)MAX 250s pulse test @ < 0.5 duty cycle VGS=15&10V 450 360 270 180 90 0 TJ=125C TJ=25C T J=-55C 5 10 15 20 VDS, Drain to Source Voltage (V) RDS(on) vs Drain Current 25 0 1 2 3 4 5 6 VGS, Gate to Source Voltage (V) 7 RDS(on) Drain to Source ON Resistance 1.1 V GS=10V DC Drain Current vs Case Temperature 160 I D, DC Drain Current (A) 240 140 120 100 80 60 40 20 0 25 50 75 100 125 TC, Case Temperature (C) 150 1.05 1 0.95 0.9 0 Normalized to VGS =10V @ 71.5A V GS=20V I D, Drain Current (A) APT website - http://www.advancedpower.com 4-7 APTC60DAM18CTG - Rev 2 October, 2005 40 80 120 160 200 APTC60DAM18CTG RDS(on), Drain to Source ON resistance (Normalized) Breakdown Voltage vs Temperature BVDSS, Drain to Source Breakdown Voltage (Normalized) 1.2 1.1 1.0 0.9 0.8 0.7 -50 -25 0 25 50 75 100 125 150 TJ, Junction Temperature (C) ON resistance vs Temperature 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -50 -25 0 25 50 75 100 125 150 TJ, Junction Temperature (C) Maximum Safe Operating Area V GS=10V ID= 143A Threshold Voltage vs Temperature 1.2 VGS(TH), Threshold Voltage (Normalized) 1000 I D, Drain Current (A) limited by RDSon 1.1 1.0 0.9 0.8 0.7 0.6 -50 -25 0 25 50 75 100 125 150 TC, Case Temperature (C) 100s 100 1 ms 10 DC line Single pulse TJ =150C 1 1 10 100 10 ms 1000 VDS, Drain to Source Voltage (V) Gate Charge vs Gate to Source Voltage VGS , Gate to Source Voltage (V) Capacitance vs Drain to Source Voltage 100000 Ciss 14 12 10 8 6 4 2 0 0 200 400 600 800 Gate Charge (nC) 1000 1200 APTC60DAM18CTG - Rev 2 October, 2005 C, Capacitance (pF) 10000 Coss ID=143A TJ=25C VDS=120V V DS=300V VDS=480V 1000 Crss 100 10 0 10 20 30 40 50 VDS, Drain to Source Voltage (V) APT website - http://www.advancedpower.com 5-7 APTC60DAM18CTG 350 300 td(on) and td(off) (ns) Delay Times vs Current 120 td(off) Rise and Fall times vs Current VDS=400V RG=1.2 T J=125C L=100H 100 tr and t f (ns) 250 200 150 100 50 0 0 40 80 120 160 200 240 ID, Drain Current (A) Switching Energy vs Current 10 9 8 7 6 5 4 3 2 1 0 0 VDS=400V RG=1.2 TJ=125C L=100H td(on) VDS=400V RG=1.2 TJ=125C L=100H tf 80 60 40 tr 20 0 0 40 80 120 160 200 240 ID, Drain Current (A) Switching Energy vs Gate Resistance 20 Switching Energy (mJ) V DS =400V ID=143A T J=125C L=100H Switching Energy (mJ) E off 15 10 5 0 Eoff Eon E on 40 80 120 160 200 ID, Drain Current (A) 240 0 2.5 5 7.5 10 Gate Resistance (Ohms) 12.5 Operating Frequency vs Drain Current 160 140 Frequency (kHz) I DR, Reverse Drain Current (A) Source to Drain Diode Forward Voltage 1000 T J=150C 120 100 80 60 40 20 0 30 ZCS 100 TJ=25C ZVS VDS=400V D=50% RG=1.2 T J=125C T C=75C Hard switching 10 1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 VSD, Source to Drain Voltage (V) APT website - http://www.advancedpower.com 6-7 APTC60DAM18CTG - Rev 2 October, 2005 50 70 90 110 ID, Drain Current (A) 130 APTC60DAM18CTG Typical SiC Diode Performance Curve Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 0.3 Thermal Impedance (C/W) 0.9 0.25 0.2 0.15 0.1 0.05 0.7 0.5 0.3 0.1 0.05 0.0001 0.001 Single Pulse 0 0.00001 0.01 0.1 1 10 Rectangular Pulse Duration (Seconds) Forward Characteristics Reverse Characteristics 200 I F Forward Current (A) TJ=25C IR Reverse Current (A) 2000 TJ =175C 1500 TJ =125C 1000 500 0 200 TJ =75C TJ=25C 150 100 50 0 0 0.5 TJ =75C TJ=175C TJ =125C 1 1.5 2 2.5 3 3.5 VF Forward Voltage (V) Capacitance vs.Reverse Voltage 300 400 500 600 700 VR Reverse Voltage (V) 800 4000 C, Capacitance (pF) 3000 2000 1000 0 1 10 100 VR Reverse Voltage 1000 APTC60DAM18CTG - Rev 2 October, 2005 "COOLMOSTM comprise a new family of transistors developed by Infineon Technologies AG. "COOLMOS" is a trademark of Infineon Technologies AG". APT reserves the right to change, without notice, the specifications and information contained herein APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. APT website - http://www.advancedpower.com 7-7 |
Price & Availability of APTC60DAM18CTG |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |